in the installed condition is only possible in the case of a few furnace manufac-\nturers. This must be an open cage construction, in which the iron piles can if nec-\nessary be detached from the outside and moved to the side. The coil jacket is\nthen cut open at the damaged point of the coil. The coil can then be exposed from\nthe inside by removing the coil plastering or smooth coil coating. The damaged\nintermediate layer insulation is removed, and the defective coil copper cleaned\nand repaired. After the water pressure test, the intermediate layer insulation is\ninstalled, the coil copper painted and the repair spot dried with hot air for\napprox. 15 min. The plastering can then be applied again. Before lining the cru-\ncible, the repair spot should be allowed to dry for 4 to 12 hours, depending on\nthe thickness and density of the coil plastering. The coil jacket is glued back on\nagain from outside, and the cut areas sealed off with glass fibre material. The\niron pile or piles are replaced in position and attached using the press-screws.\n<\/p>\n","protected":false},"excerpt":{"rendered":"
in the installed condition is only possible in the case of a few furnace manufac- turers. This must be an open cage construction, in which the iron piles can if nec- essary be detached from the outside and moved to the side. The coil jacket is then cut open at the damaged point of the … Continue reading Coil Repair<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":""},"categories":[2],"tags":[],"class_list":["post-1196","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"acf":{"adresse":"","telefon":"","e-mail":"","webseite":""},"_links":{"self":[{"href":"https:\/\/aboutfoundry.com\/en\/wp-json\/wp\/v2\/posts\/1196","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/aboutfoundry.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/aboutfoundry.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/aboutfoundry.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/aboutfoundry.com\/en\/wp-json\/wp\/v2\/comments?post=1196"}],"version-history":[{"count":1,"href":"https:\/\/aboutfoundry.com\/en\/wp-json\/wp\/v2\/posts\/1196\/revisions"}],"predecessor-version":[{"id":1197,"href":"https:\/\/aboutfoundry.com\/en\/wp-json\/wp\/v2\/posts\/1196\/revisions\/1197"}],"wp:attachment":[{"href":"https:\/\/aboutfoundry.com\/en\/wp-json\/wp\/v2\/media?parent=1196"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/aboutfoundry.com\/en\/wp-json\/wp\/v2\/categories?post=1196"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/aboutfoundry.com\/en\/wp-json\/wp\/v2\/tags?post=1196"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}